Search this site

Trimble Novapoint Help

  • Home
  • Getting Started
    • Prerequisites
    • Novapoint Road
      • General
        • License Setup
        • Standard vs. Professional
    • Novapoint Water & Sewer
      • WS Task in Quadri
      • Configuration File
      • Design
      • Export
        • Export to SOSI
        • Export to KOF
        • Export to LandXML
        • Export to InfraModel
        • Manhole Report Road Stationing/Chainage
      • Product Library
    • Tips for Searching Help
    • Ask a Help Question or Give Feedback
    • Rate this Help Site
  • Novapoint Tools
    • Load Module
    • Drawing Scale
    • Task Selector
    • Object Menu (NCO)
    • Drawing Presentations from Quadri
      • Draw Plan Presentation
      • Draw Long-Sections
      • Draw Cross-Sections
    • Terrain Information
      • Terrain Cross-Section - Report
      • Section from 3D Drawing
      • Draw Longitudinal Profile from Quadri
      • Draw Cross-Section from Quadri
      • Draw Contours from Grid Model
      • Create Contour Colored Layering from 3DFaces
      • Create Water Drop Line on 3DFaces
      • Get Point Elevations from 3DFaces
    • Map
      • Insert Raster Image
      • Smooth Contours
      • Straighten Contours
      • Label 2D Contours
      • Label 3D Contours
      • Technical Maps
      • Technical Map Symbols
      • Economical Maps
      • Economical Map Symbols
      • Map Lines
      • Area State
      • Area Use
      • Building and Constructions
      • Road Situation
      • Hatch Graphic Standard
    • Coordinate Tools
      • Setting Out - From Drawing
      • Get Edge Line from Solid
      • Draw Coordinate Annotation
      • Update Coordinate Annotation
      • Coordinate Tools Settings
    • Drawing Presentation
      • Insert Frame/Panel
      • Insert Panel Additions
      • Insert Scale Bar
      • Insert North Arrows
      • Insert Section Arrows
      • Insert Detail Markings
      • Draw Grid Lines
      • Draw Revision Cloud
      • Draw Fill Areas
      • Draw Slope Markings from Polyline
      • Draw Symbols to Terrain Cross-Sections
      • Cross-Section Layout Generator
      • Create Rotated View
      • Create Boundary Line
    • Calculate
      • Calculate Area
      • Calculate Line Length
      • Update Calculation/Annotation
      • Quantity Table
    • Tools
      • Selection Filter
      • Text ISO3098
      • Show Blocks in Drawing
      • Count Blocks in Drawing
      • Circle to Two Arcs
      • Draw ASCII File
      • Double-Side Offset
      • Polyline Paintbrush
      • Remove XData from Line
      • Convert 2D Polyline to 3D Polyline
      • Change All Elevations to 0
      • Change Layer Order
  • Novapoint Geosuite
    • Import Wizard
    • Drawing Rule Selector
    • Road Model in GeoSuite
    • Configure Geosuite
    • Contaminated Soil
    • GeoSuite Profiles Plotted in Quadri for Windows
    • Read Alignment from Quadri
    • Rock and Soil Subsurfaces
      • Create Subsurfaces
      • Assumed Bedrock
      • Check Rock Model
      • Graphical Interpretation
        • Diagrams in the Interpretation Process
        • Interpreted Lines
        • Interpreted Points
    • Terrain and Subsurface from Quadri
    • Frequently Asked Questions (FAQs)
      • Configure Geosuite for AutoCAD/Civil3D (15.2)
      • WinRit does not start
      • Change configuration with Geosuite Config Switcher
      • Geosuite and Projectwise
      • Configure Geosuite to user the same profile as AutoCAD/Civil3D
      • Load the Geosuite-panel in Novapoint Basis
      • Windows can´t find Geosuite.Core.IO.AgrafCls100.dll
      • Create a Custom Template for Geosuite
      • Export terrain model to LandXML
      • Geosuite Hatch Patterns in Autocad
      • Plan view drawings with multiple colors on plan symbols
      • Presentation rule Geotechnical SoilRock
      • Problem with symbol size in AutoCAD
      • Geosuite Stability & Xref frĂĄn Civil3D
  • Novapoint Landscape
    • Construct Lines and Polygons
      • Line Construction
      • Vehicle Path Diagrams
      • Parking Lots
      • Turnaround
      • Bus Stop
      • Draw Grid
      • Create Polygon Along a Line
      • Create Polygon, Select in Area
      • Create Polygon, Select Lines
      • Parametric Sport Field
    • Lines and Land Use
      • Draw/Change
      • Remove Description
      • Remove Properties from Line
      • Show Lines with Topology Features
      • Change Line to Kerb/Curb Line
      • Insert Land Use Text
      • Connect All Text with Borders, Automatically
      • Connect Text with Borders, Manually
      • Connect One or Several Land Use Areas
      • Disconnect All Land Use Areas
      • Disconnect One or Several Land Use Areas
      • Update Connection with Borders, Manually
      • Define
      • Change Type of Area
      • Change Attributes
      • Update Area Drawing Rule
      • Set Text Height
      • Area Attributes
      • Area Drawing Rules
      • Switch Drawing Rules for All Surfaces
      • Fictitious Distance from Color to Boundary
      • Import Drawing Rules for Surfaces
      • Export Drawing Rules for Surfaces
    • Planting Design
      • Single
      • Row
      • Avenue
      • Plant Bed (one species)
      • Edit Symbol Description
      • Calculate Percentual Plant Mix
      • Delete Percentual Plant Mix
    • Symbols
      • Setout an Object
      • Setout Objects Along a Line
      • Setout a Street Light
      • Setout Street Lights Along a Line
      • Setout a WS Point
      • Setout WS Point Along a Line
      • Edit Symbol Description
      • Illustrations
      • Draw Ramp
      • Calculate Step
      • Draw Terrace Step
      • Draw Stair Report
    • Quantities
      • Edit Quantity Description
      • Search for Land Use in Drawing
      • Draw Quantity List
    • Elevation Tools
      • New Point Elevations - Reference
      • New Point Elevations - Running
      • Point Elevation from Terrain Model
      • Add Slope Arrow
      • Edit Point Elevations
      • Edit Slope Arrow
      • Move Point Elevation X,Y
      • Slope Restrictions
      • Elevations Setup
      • Show/Hide Slope Arrows
      • Rotate Point Elevations
      • Insert Leader to Point Elevation
      • New Single Point Elevation
      • Point Elevations from Terrain Model (grid)
      • Create Point Elevations from Blocks
      • Point Elevations from 3D Poly
      • Point Elevation from Triangle
      • Add Point Elevation
      • Check Point Elevations
      • Draw 3D-poly from Point Elevation
      • Get Point Elevation from Terrain Shape
      • Change to Point Elevation Retained
      • Change to Point Elevation Omitted
      • Terrace Height
      • Insert Prefix to Point Elevation
      • Copy Point Elevations
      • Copyclip Point Elevations
      • Pasteclip Point Elevations
      • Reset Point Elevations
    • Terrain Design
      • Slope Surface
        • Calculation Settings
        • Save to Terrain Settings
        • Ground Condition
        • Design Features
        • Drawing Rules
      • Set Object Elevation
      • 3D Line
        • Lines Only
        • Elevation from NYLP
        • Point Elevations
        • Heights
      • 3D Model - Cross-Section Along Line
      • Offset 3D Lines
      • Give Contour Elevation (Z-value)
      • Give Objects New Elevation (z-value)
    • Tools
      • Tooltip On
      • Tooltip Off
      • Label 2D Contours
      • Label 3D Contours
      • Symbol Legend
      • Linetype/Area Legend
      • Area Attribute Legend
      • Single Selection Mode
      • Multiple Selection Mode
      • Quantity Templates
      • Draw Single Alignment
      • General
      • Leader Annotation
        • Leader Annotation Setup
      • Area Label on Defined Area
      • Area Label by Selecting Lines
    • Terrain Shaping in a Quadri Model
  • Novapoint Noise
    • Roads and Railroads
      • Active
      • Dialog Box
      • Delete
      • Display
      • Edit
      • Gradient
      • New
      • Passive
      • Roads and Railroads
      • Terrain Model Codes
      • Traffic Data
    • Buildings
      • Absorption
      • Absorption 2
      • Active
      • Buildings
      • Calculation Points
      • Delete
      • Dialog Box
      • Edit
      • Fetch
      • New
      • Number of Persons
      • Passive
      • Reflection Off
      • Reflection On
      • Small Buildings
      • Style
    • Calculation Points
      • Active
      • Add 3DBA
      • Delete
      • Dialog Box
      • Edit
      • Facade Points
      • Grid
      • Heights
      • Heights 2
      • Identity
      • New
      • Passive
      • Reset Text
      • Reset Text 2
      • Several New
      • Style
      • Text at Calculation Points
    • Hard Ground Regions
      • Active
      • Delete
      • Dialog Box
      • Edit
      • New
      • Passive
      • Style
    • Barriers
      • Absorption
      • Absorption 2
      • Active
      • Barriers
      • Delete
      • Dialog Box
      • Edit
      • Edit Heights
      • New
      • Passive
      • Reflection Off
      • Reflection On
      • Style
    • Calculation
    • Noise Contour Lines
    • External Calculation
    • Style
    • Reports
    • Show 3D
    • Check Profile
    • Highlight Profile
    • Deletion
      • Delete
    • Global Settings
      • Layer Name for Fetching Buildings
    • Other Options
    • Settings for French Method
  • Novapoint Railway
  • Novapoint Road
    • Road Design Task
      • Task
        • Template
        • Settings (for the task)
        • Rules for Result
          • Features Sent to Conversion Rule
          • NP20
          • NP21 and NP2020
      • Design
        • Cross-Sections
        • Road Surfaces
          • Surface Groups
          • Alignments as Surface Edges
          • Boundaries
          • Ditch Design
          • Macro
          • Context (right-click) Menu
          • Save Edge as Alignment
          • Surface Properties
        • Pavement
          • Pavement
          • Inner Slope
          • Gradual Layers
          • Rehabilitation
          • Median
          • Layer Properties
        • Detailed Pavement
          • Deep Blasting
        • Landscaping
        • Analysis
          • Sight Distance Analysis
          • Junction Wizard
          • Relocate Chainage/Stationing Point
          • Draw Cross-Sections
        • Objects
          • Illustration Symbols
          • Closed Drainage
          • Design Objects
          • Property Boundaries
          • External Model
        • Side Area
          • Rounding and Rock Shelf
          • Ditch Depth
          • Sodding
          • Subgrade
        • Export/Import
          • Import from Param
          • Export to Param
          • Export to Model
          • Import from IND
        • Report to Excel
        • Setting Out Data
        • Settings
          • Elements
          • Chainage/Stationing
          • Terrain Boundaries
    • Road CAD tools
      • Project
        • Select Task
      • Alignment Design
        • Menu
        • Toolbar
        • Element Data
          • Calculation Error - Color-Coding
        • Action Buttons
        • Status Bar
        • Technical Information
          • Calculation Method
          • Input H
          • Overview
          • Supplementary Information
          • Tables
        • Alignment Design from RefPoints
      • Alignment Design from Points
        • Menu
        • Getting Started
        • User Interface - Overview
        • Input Data
        • Methods of Analysis
        • Line Calculation
        • Abbreviations
        • Shortcut Menu
        • Status Bar
        • Toolbars
      • Draw Extra Chainage/Stationing Point
      • Draw Extra Chainage/Stationing Point from Reference Alignment
      • Vertical Information Along Alignment
      • Distance Between Two Alignments
      • Intersection Between Two Alignments
      • Draw
        • Draw Horizontal Alignment
          • Draw Horizontal Alignment
          • Draw Chainage Break Symbol
          • Trim Alignment
          • Delete Alignments in Drawing
          • Adjust Chainage
          • Draw Special Elements
        • Draw Longitudinal Profile
          • Draw Longitudinal Profile from Road Model
          • Draw Longitudinal Profile from Quadri Model
          • Split Long Section from Road Design Task
          • Update Longitudinal Profile from Road Design Task
        • Draw Cross-Sections
          • Draw Cross-Sections from Road Design Task
          • Draw Terrain Cross-Sections
          • Update Road Model Cross-Sections
          • Draw Symbols to Cross-Sections
        • Draw Road Model
          • Draw Road Model
          • Draw Road Superelevation Annotations
          • Draw Sight Distance Lines
          • Draw Road Elevation Annotations
        • Drawing Generator
          • Plan and Profile Drawings
          • Standard Cross-Section Drawings
          • Quantity Diagram Drawings
          • Create Rotated View
      • Intersection Tools
        • Roundabout
        • T-Intersection
        • X-Intersection
        • Median
        • Deflecting Island
        • Road Access
        • Turnaround
        • Draw Sight Triangles at Intersection
        • Road Edge Rounding
        • Road Edge: 2R
        • Road Edge: 2R2A
        • Road Edge: 2R3A
        • Road Edge: 3R2A
      • Vehicle Track Analyzer
        • Make/Edit Path
          • 2 Points at Start/End
          • Continue Path
          • Controlled
          • Delete Last Part of Path
          • Edit Path
          • Explode Path
          • Fixed Angle
          • Following Polyline
          • Make Path, Values
          • Path by Arcs
        • Draw Result
          • Animation
          • Draw Tracks
          • Draw Vehicle, Dimensions
          • Draw Vehicle, Path
          • Erase Vehicle, Path
          • Insert Template
          • Write Values
        • Select Vehicle
        • Vehicle Track Analyzer Settings
      • Elevation Tools
        • Slope Surface
        • Slope Arrows
          • Arrows Along Baseline
          • Contour Lines
          • Setup
        • Convert Arc to Straight Lines
        • Create 3D - Line
        • Create Parallel 3D - Lines
        • Draw Contour Marks on 3D Lines
        • Get Elevation from Drawing
        • Get Elevation from Quadri
        • Height Interpolation
      • 3D Tools
        • Draw 3D Object Along an Alignment
      • Tools
        • Drawing Style Configuration
          • Alignment Design Function
          • Geometry
          • Longitudinal Profile - Local Coordinate System
          • Longitudinal Profile - Scale and Exaggeration
          • Longitudinal Profile - Style Parameters View
          • Tutorial - Alignment Style
        • Draw Tunnel Entrance Symbol
        • Illustration Symbols
        • Parking Lot Design
        • Select Direction of Traffic
        • Vehicle Symbols
    • Intersection Task in Quadri
      • Installation
      • How to Use It
      • Release Notes
        • 2018-MAY-09; VERSION 17.4
        • 2018-DEC-07; VERSION 18.4
      • Tips and Tricks
        • Draw Intersection to CAD
        • Copy/Paste Conversion Rule
    • Exporting Road Design Data
      • Road Model Files
      • To DWG
        • Classification
        • Presentation Setup with Layer Mapping
      • To LandXML
        • Classification
        • Setting Out Data
          • Method 1
          • Method 2
          • Method 3
          • Querying Features to Export
    • Technical Documentation
      • Alignment Design
      • File Name Extensions
      • Vehicle Tracking Analyzer
  • Novapoint Road Marking
  • Novapoint Road Sign
  • Novapoint Terrain
    • Terrain Design
      • 3D - Lines
      • 3D Model - Cross-Section Along Line
      • Contour Marking on 3D Lines
      • Convert Arc to Straight Lines
      • Draw 3D Poly from Point Elevations
      • Draw/Edit Contour Lines
      • Give Contour Elevation (Z-value)
      • Give Objects New Elevation (Z-value)
      • Interpolate Elevations Along 3D Line
      • Line Projection to 3D Faces
      • Move Object to Active Terrain Model Surface
      • Offset 3D Lines
      • Slope Surface
      • Straight Lines Only
    • Elevation Tools
      • Add Point Elevations
      • Add Slope Arrow
      • Check Point Elevations
      • Edit Point Elevations
      • Edit Slope Arrow
      • Move Point Elevation X,Y
      • New Point Elevations - Reference
      • New Point Elevations - Running
      • New Single Point Elevation
      • Point Elevation from Terrain
      • Point Elevation from Triangle
      • Point Elevations from 3D Poly
      • Point Elevations from Terrain (grid)
      • Slope Restrictions
    • Volume Calculation
      • Define Areas to Calculate
      • Grid Volume
      • Make Grid
      • Plan from Grid Volume
      • Section from Grid Volume
      • Volume Calculation
    • Areas
      • Area Label
      • Create Area, Select in Area
      • Create Area, Select Lines
    • Elevation Label
      • Change to Point Elevation Omitted
      • Change to Point Elevation Retained
      • Copy Point Elevations
      • Copyclip Point Elevations
      • Insert Leader to Point Elevation
      • Insert Prefix to Point Elevation
      • Label 2D Contours
      • Label 3D Contours
      • List Point Elevations from Terrain Model
      • New Point Elevations Setup
      • Pasteclip Point Elevations
      • Point Elevation from TIN Model in Drawing
      • Reset Point Elevations
      • Rotate Point Elevations
      • Show/Hide Slope Arrows
      • Symbols Elevation Label
      • Terrace Height
  • Novapoint Tunnel
    • Content overview
    • Tunnel Design
      • Scanner Data
        • Import Point Cloud
        • Script Editor
      • Tunnel Profile Library
      • Bolts
      • Cross-Section Area Calculation
      • Design Base
      • Free Space
      • Inner Tunnel Profile
      • Pavement
      • Niches
        • Niche Type Definition
      • Perimeter
    • Tunnel CAD Tools
      • Draw Tunnel Cross-Sections
      • Distance Calculation Plan Drawing
      • Draw 3D Model
      • Graphical Geology and Rock Support Registration
        • Configuration of Tunnel Tubes and Faces
        • Tunnel Grid
    • 3D Triangulation
    • Export Geometry Lines to XML
    • Export to Survey Equipment
    • Geology and Rock Support Drawing
    • Rock Support Registration
    • Rock Support Report
    • Toolbar
  • Novapoint Water & Sewer
    • About the Documentation
    • Project
      • Task
      • Configuration
        • Ditches
        • Pipes
        • Pipe Materials
        • Connectors
        • Connector Materials
        • Save
        • Import
        • Save as
        • Settings
      • Design
        • Model
        • Trench
        • Insert
        • Modify
        • Tools
        • Data
        • Window
        • Help
    • Calculations
      • Cross Sections and Quantity
      • Collision Analysis
      • Remove Collision Annotations
      • Manhole Report with Road Chainage/Stationing
      • View Cross Section
      • Check Manhole
    • Draw
      • Plan WS
      • Plan Cable
      • Drawing Editor
      • Draw Trench
      • Longitudinal Profile
      • Draw Multiple Longitudinal Profile
      • Split Long Section from WS Drawing
      • Crossing Pipes to Longitudinal Profile
      • Pipe Connections to Longitudinal Profile
      • Existing Pipe Connections to Longitudinal Profile
      • Ditch Preview
      • Cross Section
      • Manhole Sketch - Detailed
      • Draw Pipes in Cross Section for Road
      • Manhole Sketch
      • Manhole Card
      • Check Manhole Cards
      • Longitudinal Profile (old)
      • Cross Section (old)
      • Draw Frames along Centerline
      • Generate Multiple Sheets
      • Multiple Grid
      • Plan and Profile
    • Evaluation Tools
      • Slope Surface
      • Slope Arrows
      • Get Elevation from Quadri
      • Get Elevation from Drawing
    • 3D
      • Show 3D Model
      • Draw 3D Pipes/Manholes 3D from WS Model
      • Erase 3D Pipes/Manholes 3D from Drawing
      • Draw 3D Object Along an Alignment
      • Draw 3D Cable Conduits with Mould
      • Move a Drawing Object to a Given Level - using Information from the Quadri
      • Manhole Generator with Blockout
      • Select Class Code File
    • Reports
    • Export
    • Tools
      • Configuration in Plan
      • Cable and WS Plan Style
      • Long Section Style Editor
    • Product Library
      • Product Library Properties
      • Position Number and Bill of Materials (BOM)
      • Algorithmic Modelling of Pipes
      • Cut 3D Pipes
      • Manhole Coring
      • Cut Straight
      • Sectional View from 3D Drawing
    • Help
    • Shortcut Menus
      • Node
      • Connection
      • Vertex
      • Pipe
      • Ditch Bottom
  • Tutorials and Videos
    • Migration Guide
    • Videos
    • Water & Sewer
      • WS in Quadri
        • Add Classification and Export to IFC
        • Add Generic Properties to WS Objects in Quadri
        • Export Generic Properties to IFC by Editing the Conversion Rule
        • Use of Propertyset Editor for WS
        • Create a PSET and Publish it to a Quadri Project
        • Back Up Your WS Task
        • Export WS to GML
        • Make a Collection of WS Projects
        • Transfer Basic Map to a CAD Program
        • Table view of Bend
        • Open an Existing Configuration
        • View the WS Model in 3D
        • Import SOSI File with WS Data
        • Fix Missing Z-Values when Importing a SOSI File
        • Import KOF File with WS Data
        • Export WS to IFC and Upload to Trimble Connect
        • When to Use Illustration Objects
        • Create a Conversion Rule
        • When to Show Illustration Objects
        • Change Color on Pipes and Manholes
        • Import SOSI with Unknown Objecttype
        • Export IFC with stakeoutdata
        • Concatenate properties
          • Open an Older Project
        • How to do coordinate transformation of WS-task
      • WS in CAD
        • See Angles in Connections and Vertex
        • Draw 3D Solids with Stakeout Data
        • Combine Two Trenches
        • Rearrange Pipe Order in a Longitudinal Drawing
        • Edit Text Information in the Plan View
        • How to copy WS task
        • Change Text in the WS Plan View
      • Product Library
        • Install the Novapoint Product Library
        • Cut 3D Pipes
        • Extend 3D Pipes
      • Best Practices
        • Save Before Calculating
        • Clean Before Sharing
        • Use latest version
  • Support and FAQs
    • Customer Support and Sales
    • Road
      • Coordinate Transformation
      • Alignment Design
        • Parabolas or Arcs
      • Build a Road Task
        • Warning/Error Messages
      • Calculation Basis and Illustration Objects
      • Delivery
        • Combine All Road Surfaces into One
      • Drawing Longitudinal Profile
      • Draw Road Model
        • High-Resolution Monitors
      • Export Road Model Files from the Project
      • Pavement
        • Add Detailed Aggregate
      • Quantities
        • Split by Subsurface Subtypes
        • Through Conversion Rules
    • Water & Sewer
      • WS in Quadri
        • Import SOSI File Does Not Work
      • WS in CAD
        • Delete or Change Name on Trenches
        • Help Lines are not Shown in the Vertical Drawing
        • Manhole ID is not in a Longitudinal profile
        • Z-Value is Missing on Connections in a Vertical Drawing
        • Cannot see the Entire Design or Configuration Dialogue
        • Wrong Distance between Pipes when Adjusting the Trace
        • Z-Values is Missing in a Longitudinal Profile
        • FATAL ERROR Occurs in the WS Calculation
        • Manhole Symbol is Missing in the WS Plan View
      • Product Library
        • Scale Issue
        • Position Numbers are Only 00 (zero)
        • Download Product Library Does Not Work
        • Objects Disappear when Inserted into Layout
        • Missing Products from Supplier/Wrong Geometry or Attribute
        • Product View is Grey/Unable to Insert Product
        • Cannot Find an Existing Supplier in the Product Library
        • Cannot Find a Specific Part in the Product Library
  • Downloads and Release Notes
    • Novapoint
      • Release Notes
        • Novapoint 2023.4a
        • Novapoint 2023.4
          • From Civil Drawing to Trimble Drawing
        • Novapoint 2023.3a
        • Novapoint 2023.3
        • Novapoint 2023.2
        • Novapoint 2023.1
        • Novapoint 2023
        • Novapoint 2022.7a
        • Novapoint 2022.7
        • Novapoint 2022.6b
        • Novapoint 2022.6
        • Novapoint 2022.5
        • Novapoint 2022.4
        • Novapoint 2022.3a
        • Novapoint 2022.FP1
        • Novapoint 2022.3
        • Novapoint 2022.FP2a
        • Novapoint 2022.FP2
        • Novapoint 2022.a
        • Novapoint 2022
    • Intersection Tool
    • Geosuite
 

Toolbar

The toolbar in the Alignment Design Dialog Box contains some of the most important functions from the drop-down menus.

  • Get Object from Task

  • Get Center Line from Road Model

  • Object Name

  • Propose Segments


  • Undo

  • Redo


  • Append Angular Points

  • Insert Arc

  • Insert Line

  • Insert Transition Curve(s)

  • Delete


  • Insert Minimum Arc where Line-Line

  • Missing Transition Curves

  • Calculate Angular Points

  • Split Angular Points

  • Get Fixed Points from Result


  • Step Wise Editing

  • Magic Wand


  • Mirror

  • Offset

  • Trim

  • Trim Start and End

  • Break

  • Connect

  • Turn Alignment


  • Add and Pick Reference Point

  • Parallel Lines On/Off

  • Draw


  • Zoom All Elements

  • Zoom Selected Element(s)

  • Zoom Horizontal Drawing

  • Zoom Vertical Drawing


  • Vertical Drawing

  • Close Vertical Drawing


  • Design Standard

  • External Data

  • Terrain Setup

  • Options

Next topic: Element Data

Ask a question or give feedback about this help system.
Report abuse
Page details
Page updated
Report abuse