Longitudinal Profile

What

Use this function to present the longitudinal profile for the desired trench of the active water and sewer project.
It is important to know that the generated profile will show the model at the time it was generated. Use Update Longitudinal Profile to update if the model is modified.
The active water and sewer project is referred to as a simple model and the trench of the model is referred as a baseline.
Scale in the Novapoint ribbon controls indicated to scale.
The drawing layout will be according to the configuration.
Go to Configuration > settings > Presentation Longitudinal Profile... to change layer names, layer colors, line types, etc.
Create user-defined presentation style with Long Section Style Editor.

The function can be run from the following location:

1: Longitudinal Profile

2: Update Longitudinal Profile from WS Model

Step 1: Open the dialog Longitudinal Profile.

Step 2: Select Trench and insertion point.

Step 3: Press Draw.

Step 1: Calculate the model

Step 2: Run the function Update Longitudinal Profile from WS Model.

Tip: Add terrain heights from lines that are offset the trace.

Note: Tunnel profile lines are not available for the water and sewer project.