Trimble Novapoint Help
There are a few different context/right-click menus based on what node you have selected in the overview.
Insert: Gives the option to insert a new surface type if it is yet not in use.
Save road edge as alignment: Saves the road model outer edge as an alignment in Quadri.
Erase road edge as alignment: Deletes the road model outer edge saved as an alignment in Quadri.
Make Copy Opposite Side - The description of the active surface can be copied to the same surface on the other side of the centerline.
Clear Contents - All the details of the active surface will be deleted.
Insert - New surface to the active surface group can be inserted using this option. Select the surface from the submenu.
As part of the default sub-surface name, the feature type found in the conversion file is also shown.
Make Copy Opposite Side - The whole surface group properties will be copied to the other side of the centerline.
Properties - The dialog box Surface Group Properties will pop up.
Insert proposal - Only available for the surface group Ditch when in 'Advanced mode'.
Right-click on any surface (left/right side):
Copy description - The description of the active surface can be copied to other surfaces.
Paste description - The description copied in the previous shortcut menu operation can be copied to the active surface.
Make Copy Opposite Side - The description of the active surface can be copied to the same surface on the other side of the centerline.
Clear Contents - All the details of the active surface will be deleted.
Save road edge as alignment - Saves the surface edge as an alignment in Quadri.
Erase alignment created from the end of the surface - Deletes the surface edge saved as an alignment.
Properties - The dialog Surface Properties will pop up.
Next topic: Save Edge as Alignment