Drawing Style Configuration

Use this tool for the following:

This is a new function with the following new options in addition to the existing options of the old function.

New alignment styles are created by adding drawing style elements from a list and/or selecting the drawing style elements from another style (pre-defined or user-defined).

User-defined drawing styles can be used as Company Standards and can be reused in other projects as well. These new styles will be available in the alignment presentation function.

Run the function from the following locations:

MOUS_ICO Toolbar: Road > Tools: Drawing Style Configuration

MOUS_ICO Menu: Road > Tools > Drawing Style Configuration

MOUS_ICO Toolbar: Railway: Drawing Style Configuration

MOUS_ICO Menu: Railway > Draw Horizontal Alignment > Drawing Style Configuration

MOUS_ICO Menu: Bridge > Horizontal Geometry > Draw Single Alignment (Setup)

MOUS_ICO Menu: Water and Sewer > Drawing > Drawing Setup Configuration

The dialog Alignment Style Editor will pop up.

Customization Environment

Before starting to customize or create styles, familiarize yourself with the customization environment. Once familiar with the environment, take advantage of the flexibility of this function.

Tree view of style elements and their entities of the active style.

Elements View



Entities: The entities that are not desired can be removed from the style using the shortcut menu.


Figure 1: How to remove entities

Style Parameters View

Scale Factor

The base scale value is the basis for the parameters in the lower levels.

Sample Situation

Simulation options for scale and view direction.

Style Parameters

Basic values are set to the elements when the elements are added.

Sample Data

Simulation options for the style being created or customized. The created/customized style can be viewed on these sample alignments. Three sample alignments with critical segment combinations are available.

Element Parameters View

The active style element's parameters can be customized in this panel.

Parameters Terminology

See Table 1 below.

Table 1: Parameters terminology

Offset and Shift

See Figure 2 below.

Figure 2: Offset and shift

CAD Properties View

The active entity's CAD properties and geometry can be customized in this panel.

Properties Terminology

See Table 2 below.

Table 2: Properties terminology