Configuration
What
This function is used for the following operations:
Register the Water and Sewer objects such as pipes, manholes, materials, valves, hydrants, connections, etc., that shall be used in the Water and Sewer Project.
To define/edit the relation among the registered objects such as:
Among various materials available (registered materials and built-in materials), which material is to be used for different pipe types such as water supply pipe, stormwater pipe, sewage pipe, etc. Relations are to be defined.
Among various materials available, which material is to be used for different manholes such as sewage manhole, stormwater manhole etc. Relations are to be defined.
To define/edit the various connections among the registered objects such as pipe-pipe connection, pipe-manhole connection etc.
To configure the drawing setup of various objects in plan view and profile view.
To select the cross-section of the trench among various pre-defined and user-defined cross-sections. The selected cross-section will be the active cross-section.
To configure the trench cross-section for the position of pipes in the trench, protection layer, standard depth, gradient, rock shelf width, side slopes, distance sideways etc.
To define the trench foundation
Where
Run the function from the following location:
The user interface Novapoint WS Config of the function Start Configuration will pop up.
How
The configuration dialogue contains the following menus: