Draw Road Elevation Annotations
Use this function to draw elevation annotations along selected surfaces.
These annotations can be drawn for the desired section of the road model.
These annotations will be inserted at the interval used for road surface calculations.
The elevations will be read from the active road project.
The primary requirement for this function is that road surface calculations are performed in the module Road Design.
These elevations of the road surfaces are very useful for intersection design.
Run the from the following locations:
MOUS_ICO Toolbar: Draw Road Elevation Annotations
MOUS_ICO Menu: Road > Draw Road Elevation Annotations
The dialog Draw Road Elevation Annotations will pop up.
Project
Project ID - The active road model and the active Quadri line identity will be displayed.
The dialog Novapoint Project Settings will pop up with the button Project ID, which enables to set desired project/model active.
From/To Chainage - The road model's first chainage and last chainage will be displayed.
By default, elevation annotations will be drawn for the entire section of the road model.
In case, annotation is not required for the entire section, define the section at these fields.
Draw Selected surfaces with given chainage interval
Mark the check box to refresh the list.
Draw Label
The elevation annotations can be drawn either outside or inside the surface.
Mark the desired radio button.
Draw as
Annotations can be inserted either at the respective elevations of the surface points or at the elevation of the drawing file (CAD command Elevation).
Mark the desired radio button.
The label consists of a line and text.
The mid point of the line represents the road surface point and the text represents the elevation.
Codes
All the road surfaces used in the road model will be displayed.
Select the desired surfaces, for which elevation annotations are to be drawn.
Multiple surfaces can be selected using the key Ctrl or Shift.
Next topic: Drawing Generator