Novapoint 2023.1
This update also embeds an update of Quadri for Windows, update Quadri 2023.1.
Release date: 09.03.2023
Click here for information about Known issues and Compatibility Breaks.
Novapoint now works with Windows 11
CIVIL DRAWING
For info related to Civil Drawing go here.
Users who already installed Civil Drawing 2023 will see this message when starting Civil Drawing from Novapoint/Quadri.
Most functions will work as normal, but we recommend uninstalling Civil Drawing 2023 and install the newer version.
QUADRI FOR WINDOWS
For release notes related to Quadri for Windows go here.
NOVAPOINT ROAD
Alignment Design
FIXED: In Civil Drawing it would crash when changing radius from the commandline when in 'Angular Point'-mode.
Road Standard
NEW: Typical Cross-section dialog supports asymmetric cross-sections, defined pr surface group.
The dialog will automatically display Symmetric/Asymmetric depending on the data of the cross-section (surfaceno. in use, surfacename, width, slope)
Layer Properties
ENHANCEMENT/FIXED: Minor issues in the Pavement dialog and task.
Quantity report
ENHANCEMENT: Not all cases of overlap was reported in the Warning-tab.
Vehicle Tracking
FIXED: Drawing performance.
NOVAPOINT RAILWAY
Stakeout wizards in Quadri for Windows
ENHANCEMENT: Railway tasks are included in the selection.
NOVATRACK
FIXED: Minor issues when editing the alignment.
FIXED: Export to LandXML, minor issues not related to geometry.
NOVAPOINT WATER AND SEWER
Quadri - Utility
IMPROVED: Updated Default Drawing rule to present Pipe text
NEW: Added new properties in generalPropertyList (same naming as presented in the Design dialogue)
ManholeType (manhole list)
FeatureName (pipe and manhole list)
FIXED: (NOR users) GML - problem with reuse of conversion rules for “Norsk Vann” skjema 2.2 (prosjektering). Now possible to reuse conversion rule on second computer with new generated Feature Catalogue.
Design
IMPROVED: Added Connection type filter in function “Modify > Cover Elevation” (same as for existing “Modify > Connection > Bottom elevation)
NOVAPOINT BRIDGE
FIXED: For some models the Draw 3D functionality crashed.
NOVAPOINT TUNNEL
FIXED: For some models the tunnel base was not drawn correctly at the location of crossing tunnels.
FIXED: For some models the Distance Plan Drawing crashed.
NOVAPOINT ROAD SIGN
Finnish Version
New
The program has been updated with support for a number of the new signs launched by the Finnish Road Administration 01.06.2020 and updated in 2021 and 2022. The new version of the sign program can for a transitional period run in parallel with the version of the program that supports the previous standard.
Added support for new signs: - F10_8 - F10_8_2 - F10_8_3 - F10_8_4 - F10_8_5 - F11_6 - F11_6_2
3DSIGN - Added support for User Defined foundation for standard configuration.
Enhancements
General - Changed the look of border in “outline mode” for prof. signs (#HAN-5890)
General - Added support for black background color in “colorfield” (#HAN-5900)
TSTABLE - Added support for x,y,z coordinates for top on base for each mast in a 3DSIGN (#HAN-5842)
Fixed
TSTABLE - The values for X and Y coordinates in the table was swapped (#HAN-5889)
Mini - Combinations of F46.1x and F46.2x was missing (#HAN-5834)
F1.1 - Improved several rules for vertical and horizontal alignment of content
F10 - The total width of sign was not correct for some combinations if only arrow (#HAN-5898)
F16 - The user get a fatal error when try to insert mini and service (#HAN-5920)
F16 - Added all supported MINI and SERVICE (#HAN-5921)
F19 - TH40 is changed to TH45 (#HAN-5950)
F19 - Height of plate was not ok for TH45 (#HAN-5954)
F19 - Width of border was not ok for TH45 (#HAN-5955)
F19 - It was not ok to change TH for Eurovelo symbol (#HAN-5963)
F20.1 - TH40 is changed to TH45 (#HAN-5951)
F20.1 - Height of plate was not ok for TH45 (#HAN-5954)
F20.1 - Width of border was not ok for TH45 (#HAN-5955)
F20.1 - It was not ok to change TH for Eurovelo symbol (#HAN-5963)
F20.2 - TH40 is changed to TH45 (#HAN-5952)
F20.2 - Height of plate was not ok for TH45 (#HAN-5954)
F20.2 - Width of border was not ok for TH45 (#HAN-5955)
F20.2 - It was not ok to change TH for Eurovelo symbol (#HAN-5963)
F21.1 - Reduced TH for number after comma was not always correct for the distance NUMBER (#HAN-5973)
F22 - Reduced TH for number after comma was not always correct for the distance NUMBER (#HAN-5973)
F26 - Reduced TH for number after comma was not always correct for the distance NUMBER (#HAN-5973)
F26E - Reduced TH for number after comma was not always correct for the distance NUMBER (#HAN-5973)
G1 - The width of the border was not correct for colorfield (#HAN-5850)
G1 - The horizontal distance from symbol to border was not correct in all combinations (#HAN-5899)
G3 - The size of arrow was not correct for signs with only one line (#HAN-5897)
G5 - Plate height was wrong for multiple lines if TH=150 (#HAN-5894)
H1_2K - Some combinations was not ok if user change size after inserted to dwg (#HAN-5928)
H1_2-XL - Wrong color for NUMBER on blue and brown background (#HAN-5929)
H1_3-XL - Wrong color for NUMBER on blue and brown background (#HAN-5930)
Norwegian Version
New
3DSIGN - Added support for new mast type - SafeHit
Mini - Added support for 767_807.3 (Park and Ride) as new mini symbol (#HAN-5903)
Enhancements
TSTABLE - Added support to draw POS NO as text (currently BLOCK with attribute) in the table (#HAN-5854)
526.2 - Updated with data for size under sign properties (#HAN-5830)
560 - Added support for more mini symbols (#HAN-5857)
731 - Added support for more mini symbols (#HAN-5858)
Fixed
TSEXPLODE - Was not correct on brown background for sign 600.xx (#HAN-5860)
600 - A few symbols was not handled as a “brown” symbol for setting automatic brown background color (#HAN-5859)
753.2 - Horizontal alignment of arrow was not ok when only arrow as content on the line (#HAN-5642)
Swedish version
New
3DSIGN - Added support for User Defined foundation for standard configuration
NOVAPOINT ROAD MARKING
Finnish Version
Enhancements
K5 - Updateed according to new design rules (#HAN-5646)