Trimble Novapoint Help
Release date: 01.11.2022
For release notes related to Quadri for Windows go here.
Alignment Design
REVERTED: 'Propose segmentation' is now also available for alignments that are already OK.
FIXED: Import of LandXML with multiple alignments didn't show the full name when longer than 24 characters.
Pavement
NEW: Sorting option for the pavement templates. This will help with sorting the list of pavement templates and to organize them.
FIXED: Renaming the last pavement template could set all thicknesses as 'inherit' in some situations.
Closed Ditch
FIXED: There were no difference between using ABS or REL references.
Build model
IMPROVED: Faster calculation in certain situations with overlapping sections.
FIXED: Cases of crashing roadmodel.
CAD functions
IMPROVED: Drawing style “Dralin-3DInfo” for alignments was introduced in NP2022.6. Now it is improved and also draws the alignment as a 3D polyline.
NEW: Draw Cross-sections with titlebox now supports possibility to add additional file with block attributes.
The block attributes supports adding dynamic information based on
First section in sheet: #CHAINAGE1:<d>#
Last section in sheet: #CHAINAGE2:<d>#
Sheet number for the current draw-out: #NO:<n>#
These changes are in addition to what we find for road design.
Alignment Design
FIXED: CANT offset was not applied when reading data from LandXML.
Results and Quantities
FIXED: Volume report could be wrong in certain situations when using KM-stationing.
FIXED: Structurelayers could have wrong results in the cross-section, in some situations.
CAD functionality
FIXED: The vertical breakpoint could be missing in certain situations for drawing styles that uses this element type.
FIXED: Switch dialog was missing the parameter bitmap.
Quadri
NEW: Added CRS transformation for WS-model when running QG4 transformation.
FIXED: StakeOutStringPipeReferenceLine presented centerLevelLine for all pipes. Fixed to be the same as the pipe it is created from.
WS Config/Plan presentation (CAD)
NEW: Added a new setting in WS Config to present the position of the pipes and manholes in the plan drawing as designed.
WS Construction
NEW: Added new setting for presenting pipe bufferzone in graphic.
NEW: Added “Trim pipes to Manhole edge with height diff” to Pipe menu.
FIXED: Attached pipe in manhole not presented graphically if pipe not intersect with the trench shown in the vertical window.
FIXED: Wrong Top center position y-coordinate displayed in the design dialogue for rectangular manholes. Applied if the taper position was not center.
FIXED: If the pipe vertex closest to the pipe start point is a vertical vertex, then the slope gradient shown at the pipe start in the graphic is 0. The same goes for the pipe end.
WS Cross section calculation
IMPROVED: Cross section calculation may hang AutoCAD if calculation basis not defined correctly when having combined layers.
FIXED: Kommune numbers that were wrong.
The program has been updated with support for a number of the new signs launched by the Finnish Road Administration 01.06.2020 and updated in 2021 and 2022. The new version of the sign program can for a transitional period run in parallel with the version of the program that supports the previous standard.
Added support for new signs:
F1.1
F4.1
F12
F26
F26E
G5
F33 and F35_6 - Geometry was not correct for all sizes (#HAN-5438)
807.3a - Added support for new sign combination (#HAN-5171)
807.8a - Added support for new sign combination (#HAN-5164)
808.559a - Added support for new sign combination (#HAN-5184)
808.561a - Added support for new sign combination (#HAN-5174)
834.1a - Added support for new sign combination (#HAN-5165)
834.1b - Added support for new sign combination (#HAN-5185)
General - Added support for two missing pole symbols (#HAN-5382)
3DSIGN - Added support for one more standard foundation (#HAN-5506)
3DSIGN - Added support for attribute type “SignFaceDirection” (#HAN-5522)
F5 - The sign was crashing when click add plate if only symbols in the sign (#HAN-5549)
General - Added support for attribute type “MilledMarking” to longitudinal markings (#HAN-5504)
IFC - Updated conversion rule for IFC-export to support attribute type “MilledMarking” (#HAN-5512)